To order this product you must be logged into your distributor account. Not yet a M+A distributor, but interested in becoming one? Fill out this form.

WaterHog Sculptures Mat

Product Number 355 (classic border), 350 (fashion border)
WaterHog Sculptures mats feature your custom logo permanently molded into a WaterHog mat.
  • Clean & Dry - Bi-level surface effectively scrapes dirt and moisture from shoes, trapping it beneath shoe level to prevent tracking; water dam border holds moisture keeping it off your floors (WaterHog mats can hold up to 1 1/2 gallons of water per square yard)
  • Durable & Fade-Resistant - Reinforced rubber nubs prevent pile from crushing and extend the performance life of the mat; solution-dyed fabric is fade-resistant
  • Safe - Beveled edges provide a safe transition from floor to mat; certified high-traction by the National Floor Safety Institute (NFSI)
  • Available in 12 fabric colors with choice of classic (rubber) border or fashion (fabric) border
  • Eco-Friendly - PET fabric (24 ounces/yard2) is made from at least 90% recycled content reclaimed from plastic, and SBR rubber backing contains 20% recycled rubber from car tires
  • Since custom molds must be created for this mat, minimum order quantities are required on the first order

2' x 3' (23" x 35")
3' x 4' (35" x 45")
3' x 5' (35" x 58")
4' x 6' (45" x 69")

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

SURFACE
Material: Solution-dyed PET (polyethylene terephthalate); may contain up to 3% latex
Weight: 24 ounces/yard2
Construction: Needle-punched
Design: Squares

BACKING OPTIONS
Material: SBR rubber - smooth or universal cleated
Thickness: 78-mil (body thickness 78-mil; border thickness 143-mil)

Overall Mat Thickness: 3/8 inch (0.375")

STANDARDS & TESTING

  • Passes CPSC-FF1-70 for the surface flammability of carpets
  • Certified high-traction by the National Floor Safety Institute (NFSI)

WaterHog Sculpture mats can be cleaned using the following instructions:

  • Vacuum regularly (daily in high-traffic commercial areas; weekly in lower-traffic areas)
  • Extract or hose off as needed to remove heavy soil/debris
  • Hang mat to dry

Always make sure the mat is dry before placing it back in service.