To order this product you must be logged into your distributor account. Not yet a M+A distributor, but interested in becoming one? Fill out this form.

Berber Impressions HD Logo Mat

Product Number 2383
Berber Impressions mats feature your custom logo or message digitally printed on a Berber mat. These mats are ideal for use as slip-resistant entrance mats to showcase your custom logo or artwork, or in any area where moisture, tracking, or dripping occurs.
  • Durable - The tight weave of Berber makes it durable enough to withstand heavy foot traffic while scraping dirt and moisture from shoes to minimize tracking
  • High Definition - The Berber fabric features a smooth surface that allows for crisp printing definition 
  • Eco-Friendly - These mats are made with PET (polyethylene terephthalate), a type of polyester yarn that features 85% recycled content reclaimed from plastic drink bottles
  • Easy to Clean - PET fabric is naturally resistant to staining
  • Attractive - The loop pile "berber" construction features a hobnail design for an upscale look
  • Safe - Durable rubber backing helps keep the mat in place to minimize slipping hazards
  • 56 standard color options; choice of smooth or universal cleated rubber backing
  • Intended for indoor or outdoor covered use; not intended for use in direct sunlight as fading will occur

2' x 3' (24" x 35")
3' x 4' (35" x 47")
3' x 5' (35" x 59")
3' x 10' (35" x 119")
4' x 6' (45" x 69")
4' x 8' (45" x 95")
5' x 8' (58" x 95")
5' x 10' (58" x 119")
6' x 10' (68" x 119")
6' x 12' (68" x 143")

Special sizes are available in widths of 3' (35"), 4' (45"), 5' (58"), or 6' (68") and whole foot lengths up to 20'

Please note, mat size is approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

SURFACE
Fiber: PET (polyethylene terephthalate) with 85% recycled content
Weight: 44 ounces/yard2
Construction: Needle-punched
Design: Hobnail

BACKING
Material: Rubber - smooth or universal cleated
Thickness: 68-mil (body thickness 68-mil; border thickness 68-mil)

OVERALL MAT THICKNESS: 5/16 inch (0.3125")

STANDARDS & TESTING

  • Passes DOC-FF1-70 for the surface flammability for the surface of carpets

Berber Impressions HD logo mats are produced using a layering process of color. Colors are matched to our standard pallet of 56 colors. PMS color matching is not available.

Minimum Text Height: 1.5"
Minimum Line Thickness: 1/4"

These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.

Light background colors should be avoided due to their tendency to show dirt on the mat more than a darker or neutral tone.  Tints, screens, and transparencies are not supported and should not be used.

Mat Size                       Max. Imprint 
2' x 3' (23" x 35")          21" x 33" 
3' x 4' (35" x 47")          33" x 45" 
3' x 5' (35" x 59")          33" x 57"  
3' x 10' (35" x 119")         33" x 117" 
4' x 6' (45" x 69")          43" x 67" 
4' x 8' (45" x 95")           43" x 93"  
6' x 10' (68" x 119")         66" x 117" 
6' x 12' (68" x 143")         66" x 141" 

Berber Impressions mats can be cleaned using the instructions below:

  • Vacuum regularly (daily in high-traffic commercial areas; weekly in lower traffic areas).
  • Extract or hose off as needed to remove heavy soil/debris. Hang mat to dry.

Always make sure the mat is dry before placing it back in service.