To order this product you must be logged into your distributor account. Not yet a M+A distributor, but interested in becoming one? Fill out this form.
CoreFusion Plus™ Mat
- Dual-Fiber Performance - Durable classic nylon combines with advanced Solaris™ fiber technology that dries up to 2.3 times faster than standard nylon
- Soil-Hiding Design - New pattern engineered to conceal dirt and maintain a clean appearance between maintenance cycles
- Safe - Certified high-traction by the National Floor Safety Institute (NFSI)
- When backed with nitrile rubber this mat is commercially launderable
- Available in 2 colors
Recommended for indoor use at commercial entryways, in lobbies or any interior location where additional traction or moisture control is needed.
2' x 3' (24" x 35")
3' x 4' (35" x 47")
3' x 5' (35" x 59")
3' x 6' (35" x 69")
3' x 8' (35" x 95")
3' x 10' (35" x 119")
4' x 6' (45" x 69")
4' x 8' (45" x 95")
4' x 10' (45" x 119")
Available in custom sizes with widths of 3' (35") and 4' (45") and whole foot lengths up to 40'.
Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
SURFACE
Material: Solution-dyed type 6 nylon / Solution-dyed PET (polyethylene terephthalate) Blend
Weight: 23 ounces/yard2
Construction: Cut pile
Substrate: Freudenberg LUTRADUR polyester spunbond non-woven fabric (3.8 ounces/yard2)
BACKING OPTIONS
Material: Nitrile rubber - smooth, universal cleated or magnetic
Thickness Options:
Standard duty 52-mil (body thickness 52-mil; border thickness 94-mil)
Medium duty 65-mil (body thickness 65-mil; border thickness 107-mil)
Heavy duty 90-mil (body thickness 90-mil; border thickness 90-mil)
Overall Mat Thickness: 3/8 inch (0.375")
STANDARDS & TESTING
- Passes flammability standard DOC FF1-70
- Certified high-traction by the National Floor Safety Institute (NFSI)
CoreFusion mats can be cleaned in several different ways:
- Commercially laundered (see Laundering Instructions)
- Vacuumed regularly: daily in high-traffic areas, weekly in lower-traffic applications
- Cleaned with an extractor
- Hang mat to dry
Mats should always be dry before they are placed back in service, and cooled before rolling.
CoreFusion Plus mats that are backed with nitrile rubber can be commercially laundered. Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue. For heavy soil, increase temperature to max 120-140 degrees F (49-60 degrees C). Break should not exceed pH of 9.5; use low pH non-ionic detergents.
- Flush 2-3 minutes, medium water level, 100-120 degrees F (38-49 degrees C)
- Flush (optional) 2-3 minutes, medium water level, 100-120 degrees F (38-49 degrees C)
- Break 2-3 minutes, high water level, 100-120 degrees F (38-49 degrees C)
- Rinse 2 minutes, high water level, cold
- Rinse 2 minutes, high water level, cold
- Extract (low speed) 1-2 minutes
- Shake out (rotate wheel at wash speed with drain open) 1 minute
- Extract (low speed) 3-5 minutes
- Dry 5-10 minutes, 180 degrees F (82 degrees C) basket temp.
- Cool down 5 minutes
- Lay mats flat following removal from washer or dryer. Allow to cool before rolling.
Do not over-dry mats; basket temperature of dryer should not exceed 180 degrees F (82 degrees C). If mats are not dried, final rinse can be increased to 140 degrees F (60 degrees C). This will reduce moisture retention following extraction.
Important: Nylon carpet fibers may shrink when exposed to excessive heat, which may shorten the life of the product. Do not exceed the recommended wash and dry temperatures and cycle time.
